Skillnad mellan versioner av "The roots of Saab AB"
(2 mellanliggande versioner av samma användare visas inte) | |||
Rad 3: | Rad 3: | ||
<P> | <P> | ||
<P> | <P> | ||
− | This is the long version of this article, if you prefer a short version, [[ | + | This is the long version of this article, if you prefer a short version, [[The roots of Saab AB (a short version)|click here.]]<p> |
When new facts appear or errors are identified, text will be corrected accordingly.<p> | When new facts appear or errors are identified, text will be corrected accordingly.<p> | ||
Rad 13: | Rad 13: | ||
=== Bofors AB, f. 1646 === | === Bofors AB, f. 1646 === | ||
Note 1<p> | Note 1<p> | ||
− | <b>Bofors Hammarbruk AB</b>, a tilt-hammer factory using bar iron as raw material, was founded 1646 in Karlskoga, Sweden. The company was in operation from around 1649 and continued as a rather small factory under many different owners during 200 years | + | <b>Bofors Hammarbruk AB</b>, a tilt-hammer factory using bar iron as raw material, was founded 1646 in Karlskoga, Sweden. The company was in operation from around 1649 and continued as a rather small factory under many different owners during 200 years.<p> |
− | In 1812 a new owner, scientifically educated, started systematic studies on the iron manufacturing process. From late1860’s steel-maker Krupp was the first company able to produce high strength cast-steel quality to endure the high inner pressure (5000 bar) of the more efficient rear loaded cannons. But their cast-steel still needed to be forged to reach the necessary quality level. For the first time since the1500’s, the Swedish Army bought the superior Krupp cannons in 1879 to be able to get the best cannons. | + | In 1812 a new owner, scientifically educated, started systematic studies on the iron manufacturing process. From late1860’s steel-maker Krupp was the first company able to produce high strength cast-steel quality to endure the high inner pressure (5000 bar) of the more efficient rear loaded cannons. But their cast-steel still needed to be forged to reach the necessary quality level. For the first time since the1500’s, the Swedish Army bought the superior Krupp cannons in 1879 to be able to get the best cannons.<p> |
+ | <br> | ||
− | Bofors this year made a metallurgic break-through for cast-steel after years of systematic trials. Bofors was the first company to produce cast-steel quality strong enough, without the need of forging, to handle the extreme high pressure in rear-loaded cannons. Already in 1880 Bofors could deliver this high strength cast-steel to established cannon maker Finspång, which would complete the rear-loaded cannons and made them ready for use. | + | Bofors this year made a metallurgic break-through for cast-steel after years of systematic trials. Bofors was the first company to produce cast-steel quality strong enough, without the need of forging, to handle the extreme high pressure in rear-loaded cannons. Already in 1880 Bofors could deliver this high strength cast-steel to established cannon maker Finspång, which would complete the rear-loaded cannons and made them ready for use.<p> |
+ | <br> | ||
− | In the aftermath of the WW1 peace agreement, Krupp and Bofors agreed on future cooperation in October 1919. To cooperate and use Krupp technology Bofors paid 1,5 million SEK. Bofors also took over Krupp’s blocked orders (12 million SEK). | + | In the aftermath of the WW1 peace agreement, Krupp and Bofors agreed on future cooperation in October 1919. To cooperate and use Krupp technology Bofors paid 1,5 million SEK. Bofors also took over Krupp’s blocked orders (12 million SEK).<p> |
After emission of new Bofors shares in February 1921, Krupp paid 4.5 million SEK for 25 % of Bofors shares. | After emission of new Bofors shares in February 1921, Krupp paid 4.5 million SEK for 25 % of Bofors shares. | ||
− | Transaction was made through an intermediate company called AB Bofors-intressenter (=BI) ≈ Bofors stakeholders/Interested partners. The share capital was 10 000 Swedish Kroner !! This cooperation agreement would create political tensions in Sweden during early 1930s. | + | Transaction was made through an intermediate company called AB Bofors-intressenter (=BI) ≈ Bofors stakeholders/Interested partners. The share capital was 10 000 Swedish Kroner !! This cooperation agreement would create political tensions in Sweden during early 1930s.<p> |
+ | <br> | ||
− | BI Chairman Mauritz Carlsson, also a Bofors Board Member, succeeded in 1934 by Sven Wingquist who had negotiated the deal with Krupp in 1921 as Chairman of the Board for Bofors! Sven Wingquist is inventor of the spherical ball bearing and founder of SKF AB. in. He was CEO from 1907 -1919 when he left the company but remained on the Board of Directors. | + | BI Chairman Mauritz Carlsson, also a Bofors Board Member, succeeded in 1934 by Sven Wingquist who had negotiated the deal with Krupp in 1921 as Chairman of the Board for Bofors! Sven Wingquist is inventor of the spherical ball bearing and founder of SKF AB. in. He was CEO from 1907 -1919 when he left the company but remained on the Board of Directors.<p> |
− | War Material Agreement was signed in October of 1921 valid until 30 June 1941. (Facts in p. 328-336 in Steckzén’s book on Bofors from 1946.) | + | War Material Agreement was signed in October of 1921 valid until 30 June 1941. (Facts in p. 328-336 in Steckzén’s book on Bofors from 1946.)<p> |
+ | <br> | ||
− | German armament industry intensified its activites operations from 1934 and Bofors cooperation with Krupp was no longer acceptable for the Swedish government. Dr. Sven Wingquist, Bofors CEO at the time , succeeded after long negotiations to convince Krupp to give up its control of BI-shareholding of Bofors. From a Swedish perspective this ownership was very politically sensitive at the time. | + | German armament industry intensified its activites operations from 1934 and Bofors cooperation with Krupp was no longer acceptable for the Swedish government. Dr. Sven Wingquist, Bofors CEO at the time , succeeded after long negotiations to convince Krupp to give up its control of BI-shareholding of Bofors. From a Swedish perspective this ownership was very politically sensitive at the time.<p> |
+ | <br> | ||
− | The shares in Bofors-intressenter” were sold in Private Placement June 4th 1935 to Swedish owners. Axel Wenner-Gren (at the time major owner of a few companies e.g. Electrolux) bought the major portion of these shares. | + | The shares in Bofors-intressenter” were sold in Private Placement June 4th 1935 to Swedish owners. Axel Wenner-Gren (at the time major owner of a few companies e.g. Electrolux) bought the major portion of these shares.<p> |
+ | <br> | ||
Bofors AB sold of all its sprawling business areas step by step and dissolved 1991. High-tech weapon-systems were acquired fully by Saab AB in 1999. It was owned by earlier spun-off Bofors business area with Saab AB already a minority owner since 1991.<p> | Bofors AB sold of all its sprawling business areas step by step and dissolved 1991. High-tech weapon-systems were acquired fully by Saab AB in 1999. It was owned by earlier spun-off Bofors business area with Saab AB already a minority owner since 1991.<p> | ||
Rad 37: | Rad 43: | ||
Note 2<p> | Note 2<p> | ||
− | <b>Nydqvist & Holm AB</b>, acronym NOHAB, started as Trollhättans Mekaniska Verkstad in 1847. Manufactured large Water Turbines for electrical power stations from 1848-1980. NOHAB was best known by public as Locomotive maker and produced around 2300 units from 1865 until 1979. | + | <b>Nydqvist & Holm AB</b>, acronym NOHAB, started as Trollhättans Mekaniska Verkstad in 1847. Manufactured large Water Turbines for electrical power stations from 1848-1980. NOHAB was best known by public as Locomotive maker and produced around 2300 units from 1865 until 1979.<p> |
− | In 1916 NOHAB converted into a public company, with SKF AB as a large owner but selling its shares already 1920. NOHAB got a historic order for goods-train locomotives from Soviet Union in 1920. During 1921-24 all the 500 large steam locomotives were delivered. | + | In 1916 NOHAB converted into a public company, with SKF AB as a large owner but selling its shares already 1920. NOHAB got a historic order for goods-train locomotives from Soviet Union in 1920. During 1921-24 all the 500 large steam locomotives were delivered.<p> |
− | Soviet Union paid for the locomotives with 56 000 kg of pure gold (123 500 lbs.)! | + | Soviet Union paid for the locomotives with 56 000 kg of pure gold (123 500 lbs.)!<p> |
+ | <br> | ||
− | Bofors AB purchased shares from Göteborgs Handelsbank in NOHAB for 4 million SEK in March 1936. Bofors needed more manufacturing capacity to fill the quickly increasing market demand for their cannons. The official name of the newly formed subsidiary changed to Bofors Nohab AB. The businessman Axel Wenner-Gren was already a dominant owner of Bofors AB | + | Bofors AB purchased shares from Göteborgs Handelsbank in NOHAB for 4 million SEK in March 1936. Bofors needed more manufacturing capacity to fill the quickly increasing market demand for their cannons. The official name of the newly formed subsidiary changed to Bofors Nohab AB. The businessman Axel Wenner-Gren was already a dominant owner of Bofors AB.<p> |
''Long Version 1.2. May 17, 2015.'' | ''Long Version 1.2. May 17, 2015.'' | ||
Rad 51: | Rad 58: | ||
Note 3<p> | Note 3<p> | ||
<b>NOHAB Flygmotorfabriker</b>(≈ NOHAB Airplane Engine Factories) NOHAB F. | <b>NOHAB Flygmotorfabriker</b>(≈ NOHAB Airplane Engine Factories) NOHAB F. | ||
− | After years-long study of Swedish factories NOHAB F. was awarded state monopoly in 1930 to deliver 165 airplane engines before 1943. | + | After years-long study of Swedish factories NOHAB F. was awarded state monopoly in 1930 to deliver 165 airplane engines before 1943.<br> |
− | NOHAB F. obtained order same year to produce 40 Bristol Aeroplane Co. engines. Bristol Aeroplanes had licensed NOHAB F. to produce their engines. | + | NOHAB F. obtained order same year to produce 40 Bristol Aeroplane Co. engines. Bristol Aeroplanes had licensed NOHAB F. to produce their engines.<p> |
− | NOHAB F. developed all Jet Engines for Swedish Jet Fighters since the late 1940s to present time. The engines are based on further developed commercial jet engines most equipped with after-burner giving higher traction force and higher speeds, Base engines supplied by- de Havilland, Rolls-Royce, Pratt& Whitney, and General Electric. Name change 1941 to Svenska Flygmotor AB when AB Volvo became majority owner, wholly owned by Volvo from 1970 and named Volvo Flygmotor AB. Name changed again in 1994 to Volvo Aero AB. | + | NOHAB F. developed all Jet Engines for Swedish Jet Fighters since the late 1940s to present time. The engines are based on further developed commercial jet engines most equipped with after-burner giving higher traction force and higher speeds, Base engines supplied by- de Havilland, Rolls-Royce, Pratt& Whitney, and General Electric. Name change 1941 to <b>Svenska Flygmotor AB</b> when AB Volvo became majority owner, wholly owned by Volvo from 1970 and named <b>Volvo Flygmotor AB</b>. Name changed again in 1994 to Volvo Aero AB. |
− | GKN PLC (GKN Aerospace) bought Volvo Aero AB in October 2012.<p> | + | <br> |
+ | <b>GKN PLC</b> (GKN Aerospace) bought Volvo Aero AB in October 2012.<p> | ||
''Long Version 1.2. May 17, 2015.'' | ''Long Version 1.2. May 17, 2015.'' | ||
<br> | <br> | ||
Rad 63: | Rad 71: | ||
Note 4<p> | Note 4<p> | ||
− | <b>AB Förenade Flygverkstäder</b>, acronym AFF (≈ United Aviation Engineering Inc.) founded March 31 1937. The formation of the company was forced on the two owners below by the Swedish State. | + | <b>AB Förenade Flygverkstäder</b>, acronym AFF (≈ United Aviation Engineering Inc.) founded March 31 1937. The formation of the company was forced on the two owners below by the Swedish State.<br> |
− | Owned by ASJ AB and Nohab Bofors AB as a Holding company. The Swedish Government had an ambitious long-term plan to strengthen the military defence forces. The total number of military airplanes should increase to 257. | + | Owned by ASJ AB and Nohab Bofors AB as a Holding company. The Swedish Government had an ambitious long-term plan to strengthen the military defence forces. The total number of military airplanes should increase to 257.<br> |
− | AFF was awarded government contract April 1937 to deliver all Swedish produced 165 airplanes (2/3 of 257) within 5 years to Swedish Defence Department. | + | AFF was awarded government contract April 1937 to deliver all Swedish produced 165 airplanes (2/3 of 257) within 5 years to Swedish Defence Department.<br> |
− | AFFs task was to handle allocation of development work and production to the competing owners. The owner groups did not agree on how to cooperate. | + | AFFs task was to handle allocation of development work and production to the competing owners. The owner groups did not agree on how to cooperate.<br> |
Activities slowed dramatically in 1939, one of the few decisions the owners could easily agree on!<p> | Activities slowed dramatically in 1939, one of the few decisions the owners could easily agree on!<p> | ||
Rad 76: | Rad 84: | ||
Note 5<p> | Note 5<p> | ||
− | <b>Vagnaktiebolaget i Södertelge</b> (Wagon Inc. in Sodertalje) f. 1891. | + | <b>Vagnaktiebolaget i Södertelge</b> (Wagon Inc. in Sodertalje) f. 1891.<br> |
− | Surahammars bruk producer of iron bars founded a subsidiary to increase the use of iron e.g. railway carriages and waggons. Acronym VABIS was registered 1906. They remained the dominant vehicles in production for more than about 20 years but stopped before the merger in 1911. First motorized vehicle produced was an inspection trolley for railways. | + | Surahammars bruk producer of iron bars founded a subsidiary to increase the use of iron e.g. railway carriages and waggons. Acronym VABIS was registered 1906. They remained the dominant vehicles in production for more than about 20 years but stopped before the merger in 1911. First motorized vehicle produced was an inspection trolley for railways.<br> |
Few trucks and cars were produced from 1902 and 1903. Vabis built a new factory in 1907 dedicated for cars but also used for building trucks. Scania Vabis HQ moved to Södertälje in 1913 where new buildings had been built after a devastating fire. Cars were manufactured in shrinking numbers from 1925-1929, then only trucks and buses.<p> | Few trucks and cars were produced from 1902 and 1903. Vabis built a new factory in 1907 dedicated for cars but also used for building trucks. Scania Vabis HQ moved to Södertälje in 1913 where new buildings had been built after a devastating fire. Cars were manufactured in shrinking numbers from 1925-1929, then only trucks and buses.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 88: | Rad 96: | ||
Note 6<p> | Note 6<p> | ||
− | <b>Maskinfabriks-aktiebolaget Scania</b> (Machine factory Scania Inc.) f. 1900 in Malmö. Scania took over the operation from the English owned Svenska Aktiebolaget Humber & Co producing Humber velocipedes from 1896. | + | <b>Maskinfabriks-aktiebolaget Scania</b> (Machine factory Scania Inc.) f. 1900 in Malmö. Scania took over the operation from the English owned Svenska Aktiebolaget Humber & Co producing Humber velocipedes from 1896.<br> |
− | Investor AB acquired Scania AB shares owned by Stockholms Enskilda Bank in 1916, both Investor AB and the bank were Wallenberg controlled. | + | Investor AB acquired Scania AB shares owned by Stockholms Enskilda Bank in 1916, both Investor AB and the bank were Wallenberg controlled.<br> |
− | Scania bought the operation and also produced velocipedes until 1909, but mainly precision cogwheels and steel-rolls. Scania produced the first cars for sale, a series of 5 cars in 1903 called Scania Type A. Type A very similar to the French car Aster. | + | Scania bought the operation and also produced velocipedes until 1909, but mainly precision cogwheels and steel-rolls. Scania produced the first cars for sale, a series of 5 cars in 1903 called Scania Type A. Type A very similar to the French car Aster.<br> |
− | The engine used is a 1,85 L, 2-cylinder 8 horsepower engine from Kämper in Germany. Car no 4 of 5 produced is on display at Scania Museum in Södertälje. | + | The engine used is a 1,85 L, 2-cylinder 8 horsepower engine from Kämper in Germany. Car no 4 of 5 produced is on display at Scania Museum in Södertälje.<br> |
− | In 1902 Scania built their first truck, production for customers started 1908. | + | In 1902 Scania built their first truck, production for customers started 1908.<br> |
− | In 1909 a Scania truck made a famous 3-day 520 km test-and promotion- trip with axles equipped with SKFs newly invented spherical ball bearings. | + | In 1909 a Scania truck made a famous 3-day 520 km test-and promotion- trip with axles equipped with SKFs newly invented spherical ball bearings.<br> |
Scania approached Vabis with a proposal for cooperation that led to a contract in November 30 1910 to merge the companies. VABIS had profitability problems with and merged with Scania in 1911 to form Scania-Vabis AB, HQ in Malmö until 1913. The shares in Scania were valued at 3 times the value of Vabis shares. Engines and cars would be manufactured in Södertälje, trucks and buses in Malmö until 1926.<p> | Scania approached Vabis with a proposal for cooperation that led to a contract in November 30 1910 to merge the companies. VABIS had profitability problems with and merged with Scania in 1911 to form Scania-Vabis AB, HQ in Malmö until 1913. The shares in Scania were valued at 3 times the value of Vabis shares. Engines and cars would be manufactured in Södertälje, trucks and buses in Malmö until 1926.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 101: | Rad 109: | ||
Note 7<p> | Note 7<p> | ||
− | <b>AB Svenska Järnvägsverkstäderna</b>, acronym ASJ AB (Swedish Railway Factories Inc.) founded by the brothers Erland and Carl-Johan Uggla. | + | <b>AB Svenska Järnvägsverkstäderna</b>, acronym ASJ AB (Swedish Railway Factories Inc.) founded by the brothers Erland and Carl-Johan Uggla.<br> |
− | ASJ produced train wagons, locomotives and bus bodies from 1923. A license from Fruehauf US was bought in 1958 for 10 years for build-on for trucks e.g. container trailers and tank trailers. | + | ASJ produced train wagons, locomotives and bus bodies from 1923. A license from Fruehauf US was bought in 1958 for 10 years for build-on for trucks e.g. container trailers and tank trailers.<br> |
Aeroplane development and manufacturing started in small scale 1930 in a subsidiary ASJA, see Note 8.<p> | Aeroplane development and manufacturing started in small scale 1930 in a subsidiary ASJA, see Note 8.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 110: | Rad 118: | ||
Note 8<p> | Note 8<p> | ||
− | <b>ASJ Aeroplanavdelning (short ASJA)</b> supplied various ground equipment to Swedish Air Force from 1916. ASJA Board decided to start ASJA in 1930 to develop the Sea-airplane Viking 1 for commercial customers. It was sold from 1931 and was soon succeeded by Viking II. | + | <b>ASJ Aeroplanavdelning (short ASJA)</b> supplied various ground equipment to Swedish Air Force from 1916. ASJA Board decided to start ASJA in 1930 to develop the Sea-airplane Viking 1 for commercial customers. It was sold from 1931 and was soon succeeded by Viking II.<br> |
− | During the 1930s ASJAs mainly manufactured airplanes on license from companies as Raab-Katzenstein, Junkers (Ju 68K), de Havilland, Hawker Hart, Focke Wulf and North American Northrop/Douglas | + | During the 1930s ASJAs mainly manufactured airplanes on license from companies as Raab-Katzenstein, Junkers (Ju 68K), de Havilland, Hawker Hart, Focke Wulf and North American Northrop/Douglas.<br> |
− | The merger in March 1939 between ASJA and Saab Aeroplan Aktiebolaget, was then named Svenska Aeroplan AB. They developed their own airplanes called L10 and L11. ASJA had 1937 hired a number of American airplane engineers (mostly from Douglas) with design experience of complete metal structure and outer skin stressed skin fuselage. Now often called monocoque design. | + | The merger in March 1939 between ASJA and Saab Aeroplan Aktiebolaget, was then named Svenska Aeroplan AB. They developed their own airplanes called L10 and L11. ASJA had 1937 hired a number of American airplane engineers (mostly from Douglas) with design experience of complete metal structure and outer skin stressed skin fuselage. Now often called monocoque design.<br> |
− | The airplanes were called Airplane 17 (Fpl 17) when put in operation. | + | The airplanes were called Airplane 17 (Fpl 17) when put in operation.<br> |
Linköping produced 75 and Trollhättan 136 of the 4 different versions.<p> | Linköping produced 75 and Trollhättan 136 of the 4 different versions.<p> | ||
− | + | <br> | |
− | <b>ASJA acquired Svenska Aero AB</b>< | + | <b>ASJA acquired Svenska Aero AB</b><br> |
− | Late in 1932 ASJA bought Svenska Aero AB (Swedish Aero Inc.), founded in September 1921 in Stockholm by C.C. Bücker for the price of SEK 250 000. | + | Late in 1932 ASJA bought Svenska Aero AB (Swedish Aero Inc.), founded in September 1921 in Stockholm by C.C. Bücker for the price of SEK 250 000.<br> |
− | ASJA also offered employment to all Svenska Aero engineering personnel. | + | ASJA also offered employment to all Svenska Aero engineering personnel.<br> |
Bücker 1921-22 worked as test pilot for TDS owned by the Swedish Navy | Bücker 1921-22 worked as test pilot for TDS owned by the Swedish Navy | ||
− | (Torped-departementet på Flottans Varv) (≈ Swedish Navy Airplanes) | + | (Torped-departementet på Flottans Varv) (≈ Swedish Navy Airplanes).<br> |
− | Swedish Aero Inc. produced airplanes on license from Casparwerke where Bücker had met the airplane developer Ernst Heinkel. | + | Swedish Aero Inc. produced airplanes on license from Casparwerke where Bücker had met the airplane developer Ernst Heinkel.<br> |
Heinkel left to start Ernst Heinkel Flugzeugwerke in Warnemünde in October 1922. He supported Swedish Aero financially from its start.<p> | Heinkel left to start Ernst Heinkel Flugzeugwerke in Warnemünde in October 1922. He supported Swedish Aero financially from its start.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 129: | Rad 137: | ||
Note 9<p> | Note 9<p> | ||
− | <b>“Svenska Aeroplan Aktiebolaget”</b> was founded in Trollhättan April 20 1937 as a subsidiary to Bofors-NOHAB, with a capital of 4 million Swedish Kroner. | + | <b>“Svenska Aeroplan Aktiebolaget”</b> was founded in Trollhättan April 20 1937 as a subsidiary to Bofors-NOHAB, with a capital of 4 million Swedish Kroner.<br> |
− | 1,5 million was paid by Bofors and 2,5 million from AB ERS (in some sources named AB ARS) a subsidiary of Electrolux AB where Axel Wenner-Gren was CEO dominating owner and represented its voting rights. Gustaf J. Sahlin was given the voting rights for these shares after Wenner-Gren left the Board of Directors in 1939. | + | 1,5 million was paid by Bofors and 2,5 million from AB ERS (in some sources named AB ARS) a subsidiary of Electrolux AB where Axel Wenner-Gren was CEO dominating owner and represented its voting rights. Gustaf J. Sahlin was given the voting rights for these shares after Wenner-Gren left the Board of Directors in 1939.<br> |
− | He was also CEO for the newly founded company that started with few engineers in existing NOHAB buildings. | + | He was also CEO for the newly founded company that started with few engineers in existing NOHAB buildings.<br> |
− | New manufacturing facilities for airplanes were built and ready summer 1938. | + | New manufacturing facilities for airplanes were built and ready summer 1938.<br> |
− | The factory facilities still exist 2015. | + | The factory facilities still exist 2015.<br> |
− | Saab 92 production started there in late 1940’s. | + | Saab 92 production started there in late 1940’s.<p> |
− | Svenska Aeroplan Aktiebolaget acquired “Sparmann Flygverkstad” (Sparmann Airplane workshop). Austrian Edmund Sparmann founded the company in 1932. | + | Svenska Aeroplan Aktiebolaget acquired “Sparmann Flygverkstad” (Sparmann Airplane workshop). Austrian Edmund Sparmann founded the company in 1932.<br> |
He had worked as a test pilot and engineer at the Austrian company Phönix. Flugzeugwerke A.G. and moved to Sweden in 1919 to demonstrate two different Phönix airplanes for the Swedish Army. He later worked for smaller Swedish airplane makers as a test pilot and test engineer. From 1926/32 he worked for the governmental repair/test centre called CFM. Sparmann Workshop was acquired in August 1937 to get access to the company’s competence.<p> | He had worked as a test pilot and engineer at the Austrian company Phönix. Flugzeugwerke A.G. and moved to Sweden in 1919 to demonstrate two different Phönix airplanes for the Swedish Army. He later worked for smaller Swedish airplane makers as a test pilot and test engineer. From 1926/32 he worked for the governmental repair/test centre called CFM. Sparmann Workshop was acquired in August 1937 to get access to the company’s competence.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 145: | Rad 153: | ||
Note10<p> | Note10<p> | ||
− | The new company <b>“Svenska Aeroplan AB”</b> (Swedish Airplane Inc.) was created in April 1939 by combining ASJA and Svenska Aeroplan Aktiebolaget in Trollhättan. Investor AB a Wallenberg controlled company helped financed the deal and is since then together with Wallenberg Foundations dominating owners. | + | The new company <b>“Svenska Aeroplan AB”</b> (Swedish Airplane Inc.) was created in April 1939 by combining ASJA and Svenska Aeroplan Aktiebolaget in Trollhättan. Investor AB a Wallenberg controlled company helped financed the deal and is since then together with Wallenberg Foundations dominating owners.<br> |
− | Wenner-Gren major owner of the Svenska Aeroplan Aktiebolaget | + | Wenner-Gren major owner of the Svenska Aeroplan Aktiebolaget was now no longer part of the Board of Directors as his share of ownership had been reduced.. NOHAB Flygmotorfabriker remained with Bofors Nohab AB.<br> |
− | was now no longer part of the Board of Directors as his share of ownership had been reduced.. NOHAB Flygmotorfabriker remained with Bofors Nohab AB. | + | HQ functions incl. CEO staff and airplane engineering were placed in Linköping.<br> |
− | HQ functions incl. CEO staff and airplane engineering were placed in Linköping. | + | Military airplanes have been developed, produced and tested in Linköping since 1939. Airplanes were built until 1948 in Trollhättan. Major components e.g. wings for jet planes were built until 1959 in Trollhättan.<br> |
− | Military airplanes have been developed, produced and tested in Linköping since 1939. Airplanes were built until 1948 in Trollhättan. Major components e.g. wings for jet planes were built until 1959 in Trollhättan. | ||
In 1965 the name of the company changed to Saab AB.<p> | In 1965 the name of the company changed to Saab AB.<p> | ||
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
Rad 158: | Rad 165: | ||
<b>Saab Automobile AB</b> was founded by | <b>Saab Automobile AB</b> was founded by | ||
− | Saab Scania AB and GM (General Motors) each owning 50% and 50% from January 1991. | + | Saab Scania AB and GM (General Motors) each owning 50% and 50% from January 1991.<br> |
− | The very early car activities 1945-47 took place in Linköping managed by Gunnar Ljungström , Chief Engineer for all Saab Car development until 1969. | + | The very early car activities 1945-47 took place in Linköping managed by Gunnar Ljungström , Chief Engineer for all Saab Car development until 1969.<br> |
− | Before 1972 the Saab Car activities were handled by Saab AB in Linköping. Product Development took place in Trollhättan from 1947 and series production started in 1949. | + | Before 1972 the Saab Car activities were handled by Saab AB in Linköping. Product Development took place in Trollhättan from 1947 and series production started in 1949.<br> |
− | In 1968 the 50-50 joint venture Saab-Valmet OY was founded in Uusikaopunki,Finland. The JVs first cars were produced in 1969.<p> | + | In 1968 the 50-50 joint venture Saab-Valmet OY was founded in Uusikaopunki,Finland. The JVs first cars were produced in 1969.<br> |
+ | <p> | ||
<b>In 1972 Saab Car division was formed as one part of Bildivisionen | <b>In 1972 Saab Car division was formed as one part of Bildivisionen | ||
in Saab-Scania AB. The other member was Scania-divisionen.</b><p> | in Saab-Scania AB. The other member was Scania-divisionen.</b><p> | ||
Sten Wennlo was appointed head for Saab Cars HQ located in Nyköping where also finance department, car sales and all marketing activities were placed.<p> | Sten Wennlo was appointed head for Saab Cars HQ located in Nyköping where also finance department, car sales and all marketing activities were placed.<p> | ||
− | I have insufficient knowledge how Saab Car business was managed in detail regarding cost accounts inside Saab AB 1945-1972. I am hopeful to find documents in the Saab Car Museum Archives. | + | I have insufficient knowledge how Saab Car business was managed in detail regarding cost accounts inside Saab AB 1945-1972. I am hopeful to find documents in the Saab Car Museum Archives.<p> |
''Long Version 1.2. May 17, 2015.''<p> | ''Long Version 1.2. May 17, 2015.''<p> | ||
<br> | <br> |
Nuvarande version från 3 januari 2022 kl. 18.26
SAAB Veteranerna
This is the long version of this article, if you prefer a short version, click here.
When new facts appear or errors are identified, text will be corrected accordingly.
Innehåll
- 1 Bofors AB, f. 1646
- 2 Nydqvist & Holm AB, f. 1847
- 3 NOHAB Flygmotorfabriker AB, f. May 1930
- 4 AB Förenade Flygverkstäder, f. 1937 March 31
- 5 Vagnaktiebolaget i Södertelge, f. 1891
- 6 Maskinfabriks-aktiebolaget Scania, f. 1900
- 7 AB Svenska Järnvägsverkstäderna =ASJ, f. 1907
- 8 ASJ Aeroplanavdelning =ASJA, f.1930
- 9 Svenska Aeroplan Aktiebolaget, f. April 1937
- 10 Svenska Aeroplan AB =SAAB, f. March 1939
- 11 Saab Automobile AB, f. 1991
- 12 Sources for Roots of Saab
Bofors AB, f. 1646
Note 1
Bofors Hammarbruk AB, a tilt-hammer factory using bar iron as raw material, was founded 1646 in Karlskoga, Sweden. The company was in operation from around 1649 and continued as a rather small factory under many different owners during 200 years.
In 1812 a new owner, scientifically educated, started systematic studies on the iron manufacturing process. From late1860’s steel-maker Krupp was the first company able to produce high strength cast-steel quality to endure the high inner pressure (5000 bar) of the more efficient rear loaded cannons. But their cast-steel still needed to be forged to reach the necessary quality level. For the first time since the1500’s, the Swedish Army bought the superior Krupp cannons in 1879 to be able to get the best cannons.
Bofors this year made a metallurgic break-through for cast-steel after years of systematic trials. Bofors was the first company to produce cast-steel quality strong enough, without the need of forging, to handle the extreme high pressure in rear-loaded cannons. Already in 1880 Bofors could deliver this high strength cast-steel to established cannon maker Finspång, which would complete the rear-loaded cannons and made them ready for use.
In the aftermath of the WW1 peace agreement, Krupp and Bofors agreed on future cooperation in October 1919. To cooperate and use Krupp technology Bofors paid 1,5 million SEK. Bofors also took over Krupp’s blocked orders (12 million SEK).
After emission of new Bofors shares in February 1921, Krupp paid 4.5 million SEK for 25 % of Bofors shares. Transaction was made through an intermediate company called AB Bofors-intressenter (=BI) ≈ Bofors stakeholders/Interested partners. The share capital was 10 000 Swedish Kroner !! This cooperation agreement would create political tensions in Sweden during early 1930s.
BI Chairman Mauritz Carlsson, also a Bofors Board Member, succeeded in 1934 by Sven Wingquist who had negotiated the deal with Krupp in 1921 as Chairman of the Board for Bofors! Sven Wingquist is inventor of the spherical ball bearing and founder of SKF AB. in. He was CEO from 1907 -1919 when he left the company but remained on the Board of Directors.
War Material Agreement was signed in October of 1921 valid until 30 June 1941. (Facts in p. 328-336 in Steckzén’s book on Bofors from 1946.)
German armament industry intensified its activites operations from 1934 and Bofors cooperation with Krupp was no longer acceptable for the Swedish government. Dr. Sven Wingquist, Bofors CEO at the time , succeeded after long negotiations to convince Krupp to give up its control of BI-shareholding of Bofors. From a Swedish perspective this ownership was very politically sensitive at the time.
The shares in Bofors-intressenter” were sold in Private Placement June 4th 1935 to Swedish owners. Axel Wenner-Gren (at the time major owner of a few companies e.g. Electrolux) bought the major portion of these shares.
Bofors AB sold of all its sprawling business areas step by step and dissolved 1991. High-tech weapon-systems were acquired fully by Saab AB in 1999. It was owned by earlier spun-off Bofors business area with Saab AB already a minority owner since 1991.
Long Version 1.2. May 17, 2015.
Nydqvist & Holm AB, f. 1847
Note 2
Nydqvist & Holm AB, acronym NOHAB, started as Trollhättans Mekaniska Verkstad in 1847. Manufactured large Water Turbines for electrical power stations from 1848-1980. NOHAB was best known by public as Locomotive maker and produced around 2300 units from 1865 until 1979.
In 1916 NOHAB converted into a public company, with SKF AB as a large owner but selling its shares already 1920. NOHAB got a historic order for goods-train locomotives from Soviet Union in 1920. During 1921-24 all the 500 large steam locomotives were delivered.
Soviet Union paid for the locomotives with 56 000 kg of pure gold (123 500 lbs.)!
Bofors AB purchased shares from Göteborgs Handelsbank in NOHAB for 4 million SEK in March 1936. Bofors needed more manufacturing capacity to fill the quickly increasing market demand for their cannons. The official name of the newly formed subsidiary changed to Bofors Nohab AB. The businessman Axel Wenner-Gren was already a dominant owner of Bofors AB.
Long Version 1.2. May 17, 2015.
NOHAB Flygmotorfabriker AB, f. May 1930
Note 3
NOHAB Flygmotorfabriker(≈ NOHAB Airplane Engine Factories) NOHAB F.
After years-long study of Swedish factories NOHAB F. was awarded state monopoly in 1930 to deliver 165 airplane engines before 1943.
NOHAB F. obtained order same year to produce 40 Bristol Aeroplane Co. engines. Bristol Aeroplanes had licensed NOHAB F. to produce their engines.
NOHAB F. developed all Jet Engines for Swedish Jet Fighters since the late 1940s to present time. The engines are based on further developed commercial jet engines most equipped with after-burner giving higher traction force and higher speeds, Base engines supplied by- de Havilland, Rolls-Royce, Pratt& Whitney, and General Electric. Name change 1941 to Svenska Flygmotor AB when AB Volvo became majority owner, wholly owned by Volvo from 1970 and named Volvo Flygmotor AB. Name changed again in 1994 to Volvo Aero AB.
GKN PLC (GKN Aerospace) bought Volvo Aero AB in October 2012.
Long Version 1.2. May 17, 2015.
AB Förenade Flygverkstäder, f. 1937 March 31
Note 4
AB Förenade Flygverkstäder, acronym AFF (≈ United Aviation Engineering Inc.) founded March 31 1937. The formation of the company was forced on the two owners below by the Swedish State.
Owned by ASJ AB and Nohab Bofors AB as a Holding company. The Swedish Government had an ambitious long-term plan to strengthen the military defence forces. The total number of military airplanes should increase to 257.
AFF was awarded government contract April 1937 to deliver all Swedish produced 165 airplanes (2/3 of 257) within 5 years to Swedish Defence Department.
AFFs task was to handle allocation of development work and production to the competing owners. The owner groups did not agree on how to cooperate.
Activities slowed dramatically in 1939, one of the few decisions the owners could easily agree on!
Long Version 1.2. May 17, 2015.
Vagnaktiebolaget i Södertelge, f. 1891
Note 5
Vagnaktiebolaget i Södertelge (Wagon Inc. in Sodertalje) f. 1891.
Surahammars bruk producer of iron bars founded a subsidiary to increase the use of iron e.g. railway carriages and waggons. Acronym VABIS was registered 1906. They remained the dominant vehicles in production for more than about 20 years but stopped before the merger in 1911. First motorized vehicle produced was an inspection trolley for railways.
Few trucks and cars were produced from 1902 and 1903. Vabis built a new factory in 1907 dedicated for cars but also used for building trucks. Scania Vabis HQ moved to Södertälje in 1913 where new buildings had been built after a devastating fire. Cars were manufactured in shrinking numbers from 1925-1929, then only trucks and buses.
Long Version 1.2. May 17, 2015.
Maskinfabriks-aktiebolaget Scania, f. 1900
Note 6
Maskinfabriks-aktiebolaget Scania (Machine factory Scania Inc.) f. 1900 in Malmö. Scania took over the operation from the English owned Svenska Aktiebolaget Humber & Co producing Humber velocipedes from 1896.
Investor AB acquired Scania AB shares owned by Stockholms Enskilda Bank in 1916, both Investor AB and the bank were Wallenberg controlled.
Scania bought the operation and also produced velocipedes until 1909, but mainly precision cogwheels and steel-rolls. Scania produced the first cars for sale, a series of 5 cars in 1903 called Scania Type A. Type A very similar to the French car Aster.
The engine used is a 1,85 L, 2-cylinder 8 horsepower engine from Kämper in Germany. Car no 4 of 5 produced is on display at Scania Museum in Södertälje.
In 1902 Scania built their first truck, production for customers started 1908.
In 1909 a Scania truck made a famous 3-day 520 km test-and promotion- trip with axles equipped with SKFs newly invented spherical ball bearings.
Scania approached Vabis with a proposal for cooperation that led to a contract in November 30 1910 to merge the companies. VABIS had profitability problems with and merged with Scania in 1911 to form Scania-Vabis AB, HQ in Malmö until 1913. The shares in Scania were valued at 3 times the value of Vabis shares. Engines and cars would be manufactured in Södertälje, trucks and buses in Malmö until 1926.
Long Version 1.2. May 17, 2015.
AB Svenska Järnvägsverkstäderna =ASJ, f. 1907
Note 7
AB Svenska Järnvägsverkstäderna, acronym ASJ AB (Swedish Railway Factories Inc.) founded by the brothers Erland and Carl-Johan Uggla.
ASJ produced train wagons, locomotives and bus bodies from 1923. A license from Fruehauf US was bought in 1958 for 10 years for build-on for trucks e.g. container trailers and tank trailers.
Aeroplane development and manufacturing started in small scale 1930 in a subsidiary ASJA, see Note 8.
Long Version 1.2. May 17, 2015.
Note 8
ASJ Aeroplanavdelning (short ASJA) supplied various ground equipment to Swedish Air Force from 1916. ASJA Board decided to start ASJA in 1930 to develop the Sea-airplane Viking 1 for commercial customers. It was sold from 1931 and was soon succeeded by Viking II.
During the 1930s ASJAs mainly manufactured airplanes on license from companies as Raab-Katzenstein, Junkers (Ju 68K), de Havilland, Hawker Hart, Focke Wulf and North American Northrop/Douglas.
The merger in March 1939 between ASJA and Saab Aeroplan Aktiebolaget, was then named Svenska Aeroplan AB. They developed their own airplanes called L10 and L11. ASJA had 1937 hired a number of American airplane engineers (mostly from Douglas) with design experience of complete metal structure and outer skin stressed skin fuselage. Now often called monocoque design.
The airplanes were called Airplane 17 (Fpl 17) when put in operation.
Linköping produced 75 and Trollhättan 136 of the 4 different versions.
ASJA acquired Svenska Aero AB
Late in 1932 ASJA bought Svenska Aero AB (Swedish Aero Inc.), founded in September 1921 in Stockholm by C.C. Bücker for the price of SEK 250 000.
ASJA also offered employment to all Svenska Aero engineering personnel.
Bücker 1921-22 worked as test pilot for TDS owned by the Swedish Navy
(Torped-departementet på Flottans Varv) (≈ Swedish Navy Airplanes).
Swedish Aero Inc. produced airplanes on license from Casparwerke where Bücker had met the airplane developer Ernst Heinkel.
Heinkel left to start Ernst Heinkel Flugzeugwerke in Warnemünde in October 1922. He supported Swedish Aero financially from its start.
Long Version 1.2. May 17, 2015.
Svenska Aeroplan Aktiebolaget, f. April 1937
Note 9
“Svenska Aeroplan Aktiebolaget” was founded in Trollhättan April 20 1937 as a subsidiary to Bofors-NOHAB, with a capital of 4 million Swedish Kroner.
1,5 million was paid by Bofors and 2,5 million from AB ERS (in some sources named AB ARS) a subsidiary of Electrolux AB where Axel Wenner-Gren was CEO dominating owner and represented its voting rights. Gustaf J. Sahlin was given the voting rights for these shares after Wenner-Gren left the Board of Directors in 1939.
He was also CEO for the newly founded company that started with few engineers in existing NOHAB buildings.
New manufacturing facilities for airplanes were built and ready summer 1938.
The factory facilities still exist 2015.
Saab 92 production started there in late 1940’s.
Svenska Aeroplan Aktiebolaget acquired “Sparmann Flygverkstad” (Sparmann Airplane workshop). Austrian Edmund Sparmann founded the company in 1932.
He had worked as a test pilot and engineer at the Austrian company Phönix. Flugzeugwerke A.G. and moved to Sweden in 1919 to demonstrate two different Phönix airplanes for the Swedish Army. He later worked for smaller Swedish airplane makers as a test pilot and test engineer. From 1926/32 he worked for the governmental repair/test centre called CFM. Sparmann Workshop was acquired in August 1937 to get access to the company’s competence.
Long Version 1.2. May 17, 2015.
Svenska Aeroplan AB =SAAB, f. March 1939
Note10
The new company “Svenska Aeroplan AB” (Swedish Airplane Inc.) was created in April 1939 by combining ASJA and Svenska Aeroplan Aktiebolaget in Trollhättan. Investor AB a Wallenberg controlled company helped financed the deal and is since then together with Wallenberg Foundations dominating owners.
Wenner-Gren major owner of the Svenska Aeroplan Aktiebolaget was now no longer part of the Board of Directors as his share of ownership had been reduced.. NOHAB Flygmotorfabriker remained with Bofors Nohab AB.
HQ functions incl. CEO staff and airplane engineering were placed in Linköping.
Military airplanes have been developed, produced and tested in Linköping since 1939. Airplanes were built until 1948 in Trollhättan. Major components e.g. wings for jet planes were built until 1959 in Trollhättan.
In 1965 the name of the company changed to Saab AB.
Long Version 1.2. May 17, 2015.
Saab Automobile AB, f. 1991
Note 11
Saab Automobile AB was founded by
Saab Scania AB and GM (General Motors) each owning 50% and 50% from January 1991.
The very early car activities 1945-47 took place in Linköping managed by Gunnar Ljungström , Chief Engineer for all Saab Car development until 1969.
Before 1972 the Saab Car activities were handled by Saab AB in Linköping. Product Development took place in Trollhättan from 1947 and series production started in 1949.
In 1968 the 50-50 joint venture Saab-Valmet OY was founded in Uusikaopunki,Finland. The JVs first cars were produced in 1969.
In 1972 Saab Car division was formed as one part of Bildivisionen in Saab-Scania AB. The other member was Scania-divisionen.
Sten Wennlo was appointed head for Saab Cars HQ located in Nyköping where also finance department, car sales and all marketing activities were placed.
I have insufficient knowledge how Saab Car business was managed in detail regarding cost accounts inside Saab AB 1945-1972. I am hopeful to find documents in the Saab Car Museum Archives.
Long Version 1.2. May 17, 2015.
Sources for Roots of Saab
Bofors . “En kanonindustris historia” av Birger Steckze’n Bofors. History of a Cannon industry printed by Esselte Aktiebolag, Stockholm 1946.
SKF- Världsföretaget. 1907-2007, by Martin Fritz and Birgit Karlsson ISBN 978-91-7736-575-4 Informationsförlaget Stockholm www.informationsforlaget.se English version. SKF- A global company 1907-2007
Svenska Flygplan, Den svenska flygindustrins Historia by Lennart Andersson. (History of Swedish Aviation Industry) written for Publisher “Allt om Hobby”, Box 42006, 12612 Stockholm, 1990. The best book on Swedish Aviation. ISBN 91-85496-33-2
Aktiebolaget Svenska Järnvägsverkstäderna in Linköping 1907-1972 av Bengt-Åke Rundström (red) Swedish language only. Published by Trafik-Nostalgiska Förlaget 2007. ISBN789-91-85305-45-2
Linköpingskarosserier. By Bengt-Åke Rudström, Bus-bodies from Linköping Published by Trafik-Nostalgiska Förlaget 2012 ISBN 978-91-86275-97-6
En bok om Saab-Scania (A book about Saab-Scania) Rolf Erichs et al, 1987, Streiffert, ISBN 91-7886-014-8. Issued to Saab 50 year jubilee by Saab Scania AB. English language version “The Saab-Scania story” ISBN 91-7886-024-5. I do recommend reading the book, has a lot of information and pictures for all business areas in Saab-Scania AB, concentrated on Saab products.
Scania 100 år - 1891-1991 (Scania 100 years) by Kaj Sandell, Bo Streiffert et al. Published by Saab-Scania AB, Scaniadivisionen 1990. ISBN 91-7886-065-2 Available in English, German, French and Finnish languages.
SAAB 75 år (SAAB 75 years) by Ulf Edlund, Arne Fagerstedt, Hans Kampf, Published 2012 by Svensk Flyghistorisk Förening (www.flyghistoria.org). ISSN 1100-9837. A cooperation between Svensk Flyghistorisk Förening (Swedish Aviation Historical Society) and Veteranklubben Saab Linköping. Short history of Saab and its background and information on airplane types used by Swedish Air Force from 1931 onwards. A very readable, trustworthy 40 pages booklet. Page 39 contains a list of Swedish Aviation literature published 1977-2007.
Flygvapennytt 3/97, Saab 60 År by Gert Peterson (Air Force News 3-97- Saab 60 years) Swedish language only.
NOHAB Locomotives by NOHAB Trollhättan, Sweden NOHAB No. 733. (Info from 1st locomotive to ca 1967) Faksimil from Trafik-Nostalgiska Förlaget, 2010. Not available in English
Four Biographies about members of Wallenberg family in Swedish
1 - Wallenbergs, by Staffan Tjerneld, 1969, Bonniers Förlag
2 - Att förvalta sitt pund. Marcus Wallenberg 1899-1982, by Ulf Olsson, 2009 Ekerlids förlag, ISBN 91-88595-75-7
3 - Wallenberg. Ett familjeimperium , Gunnar Wetterberg 2013, 978-91-0-013416-7. Albert Bonnier Förlag, www.albertbonnierforlag.se
4 - Finansfursten K.A. Wallenberg 1853-1938 by Ulf Olsson 2006, Bokförlaget Atlantis. ISBN 91-73531-36-7